Monthly Archives: June 2014

Issue#2: Packets were not seen at the egress interface in a snake test

Posted on June 6, 2014 by

Issue: Snake test is usually performed to check whether a device can handle traffic Tx/Rx to/from all active interfaces at line-rate. The snake test is usually performed as below; Traffic SENDER—- 0/1(Router)0/2 —- 0/3(same router)0/4—-0/5(same router)0/6— Traffic RECEIVER ports 0/1-2 … Continue reading →

Posted in Case Study | Tagged , , | Leave a comment